Call In Progress - Philips DECT 522 User Manual

7471 – hilips DE
Answer a call
1
When the phone rings, press .
TIP
If Auto Talk mode (see page 34) is on, you can simply lift up the handset from
its base station to answer the call.The default setting is off.
An incoming call has priority over other events.Whenever there is an incoming call,
other status in progress such as phone setting, menu navigation, etc. will be aborted.
WARNING When the handset rings during an incoming call, please do not hold
the handset too close to your ear as the volume of the ringing tone may damage
your hearing.
Answer a call in handsfree mode (loudspeaker)
1
When the phone rings, press
handset loudspeaker.The
2
Press to switch between the earpiece and loudspeaker.
WARNING
Switching on handsfree mode can suddenly increase the volume in
the earpiece to a very high level. Make sure the handset is not too close to your ear.
End a call
1
Press .
The call duration will be displayed on the handset screen for about 5 seconds.

Call in progress

The following options are available during a call:
Adjust earpiece volume
1
Press or
Mute
You can mute the microphone so that you can talk to someone else in the room
without your caller hearing you.
1 Press Mute to turn the microphone off.
2 Press Off to turn the microphone back on.
522-UG_3111-285-31161-(GB).indd 15
CT 522 – 3111-285-31161-
Call
then press
icon is displayed
to adjust the volume displayed on-screen.
B) – 1 14.06.06
again.The call is transferred to the
EN
15
14/6/06 17:02:2