Connect The Base Station - Philips DECT 522 User Manual

7471 – hilips DE

Connect the base station

TIP The position in which you placed the base station can have an effect on
the range and performance of your DECT 522. Avoid placing the base station
too close to large metal objects such as filing cabinets, radiators or electrical
appliances.This can impair the range and sound quality. Buildings with thick internal
and external walls may impair transmission of signals to and from the base.
WARNING The base station does not have an ON/OFF switch. Power is applied
when the power adaptor is plugged into the unit and connected to the electricity
socket.The only way to power down the unit is to unplug the power adaptor from
the electricity socket.Therefore, ensure that the electricity socket is easily accessible.
522-UG_3111-285-31161-(GB).indd 11
CT 522 – 3111-285-31161- B) – 1
Connect
Position the base station
Place the base station within reach of the
telephone line and electricity sockets.
Connect the cables
1
Plug the line cord and the power
cable
to the sockets at the back of the base
Make sure you connect the power
adaptor and telephone line cord
correctly, as incorrect connection
could damage the unit.
Always use the telephone line cord
supplied with the unit. Otherwise,
you may not get a dial tone.
2
Plug the other end of the line cord
and power cable to the telephone wall
socket and mains power socket.
The line adaptor may not be attached
to the line cord. If this is the case,
please connect the line cord to the
line adaptor before plugging it into
the line socket.
14.06.06
EN
11
14/6/06 17:02:1