Download  Print this page

Setting Up Your Dect 522 - Philips DECT 522 User Manual

Dect 6.0 digital cordless phone
Hide thumbs

Advertisement

7471 – hilips DE
A low battery alert will inform you that the handset has to be recharged. If this
happens during a call, the call may end shortly after the alert.
If the battery level becomes exceedingly low, the phone automatically switches off
shortly after the alert. Any function in progress will not be saved.
The approximate power levels of your battery are indicated as follows:
Battery is fully charged
Battery is partially charged
Battery is running low
Battery is almost fully discharged (Red)
Out of range warning
In ideal conditions, the range of the phone is up to 50 metres indoors and 300 metres
outdoors. If the handset moves outside this range, the
Searching...
will show
icon stops flashing.

Setting up your DECT 522

Depending on your country, the Welcome screen may not appear. In this case, you will
not be asked to select your country/operator/language settings.
If the Welcome screen appears
1
The Welcome screen will briefly appear, then a list of countries is displayed.
2
Scroll
or
is displayed. If you made a mistake, press Back.
3
Scroll
or
>
The handset and base will reset to load the correct settings.The standby screen is then
displayed and your phone is ready to use.
You can still make and receive calls without first selecting your country and
network operator, however the Welcome screen will appear after each call.
If the Welcome screen does not appear
Your language and network operator is pre-set.
522-UG_3111-285-31161-(GB).indd
13
CT 522 –
3111-285-31161-
Install
Not Available
then
. Move back towards the base until the
to your country and press Select. A list of network operators
to your operator and press Select.
B) – 1
14.06.06
icon will flash and the display
14/6/06
EN
13
17:02:1

Advertisement

loading

  Related Manuals for Philips DECT 522