Extras - Siemens SINAMICS BOP-2 Operating Instructions Manual

Extras

Extras menu
The extras menu allows the user to perform the following functions:
● DRVRESET - reset the Inverter to the factory default settings.
● RAM ─> ROM - copies data from the Inverters RAM to the Inverters ROM.
● FROM CRD - reads parameter data from the memory card into the Inverter memory.
● TO CARD - writes parameter data from the Inverter memory on to the memory card.
● FROM BOP - reads parameter data from the BOP-2 to the Inverter memory.
● TO BOP - writes parameter data from the Inverter memory to the BOP-2.
The basic steps for these functions are shown below.
Extras menu
1. Using the
2. Press
Drive reset
Resets the Inverter to the factory default settings.
1. Press
2. Using the
3. Press
4. The Inverter will perform a factory reset and the
5. On completion of the factory reset the BOP-2 will
6. Press
Basic Operator Panel 2 (BOP-2)
Operating Instructions, 2010-03-01, A5E02778927A AB
and keys navigate to the Extras
menu.
to display the first option of the Extras
menu.
to select the DRVRESET function.
and keys select "Yes" to reset the
Inverter to its default settings.
to confirm selection.
BOP-2 will display "BUSY" during this process.
display "DONE".
or to return to the "EXTRAS" top-level
menu.
MONITORING MONITORING CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
EXTRAS
PARAMETER PARAMETER SETUP SETUP
MONITORING MONITORING CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
DRVRESET
PARAMETER PARAMETER SETUP SETUP
MONITORING MONITORING CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
- BUSY -
PARAMETER PARAMETER SETUP SETUP
MONITORING MONITORING CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
- DONE -
PARAMETER PARAMETER SETUP SETUP
9
EXTRAS EXTRAS
EXTRAS EXTRAS
EXTRAS EXTRAS
EXTRAS EXTRAS
41