Monitoring - Siemens SINAMICS BOP-2 Operating Instructions Manual

Jog
the Jog function, when selected will allow the motor to be manually rotated by a pre-
determined value with each press of
continuously until
To enable or disable the Jog function, the following actions should be performed:
1. Using the
2. Press
3. Using the
4. Press
5. When the Jog function has been activated, the JOG
6. When the
7. Using the
8. Press
9. The JOG symbol will be removed from the screen.
10. Press
Note
Reverse function
When the JOG function has been activated; pressing
seconds will toggle to REVERSE function.
Reverse
The function of the reverse command is to set the direction of rotation of the motor from its
normal forward motion.
To reverse the direction of the motor, the following actions should be performed:
1. Using the
2. Press
3. Using the
4. Press
Basic Operator Panel 2 (BOP-2)
Operating Instructions, 2010-03-01, A5E02778927A AB
is released.
and keys navigate to the Jog screen.
to select the Jog function.
or keys to select ON.
to accept the change.
symbol will be displayed in bottom left-hand side of
the screen.
is pressed the motor will run, until the
key is released.
or keys to select OFF option.
to switch the Jog function OFF.
to return to the top level Jog screen.
and keys navigate to the Reverse
screen.
to select the Reverse function.
and keys select ON or OFF.
to accept the change.
Pressing for more than 3 seconds at any point
during this sequence will cause the BOP-2 to return
to the the default status screen.
The BOP-2 will remain in HAND mode until the
key is pressed.
. If is pressed continuously, the motor will rotate
and
Control

MONITORING

MONITORING CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
JOG
PARAMETER PARAMETER SETUP SETUP
MONITORING MONITORING CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
JOG
On
JOG
PARAMETER PARAMETER SETUP SETUP
together for more than 3
MONITORING MONITORING CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
REVERSE
PARAMETER PARAMETER SETUP SETUP
MONITORING MONITORING CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
REVERSE
On
PARAMETER PARAMETER SETUP SETUP
EXTRAS EXTRAS
EXTRAS EXTRAS
EXTRAS EXTRAS
EXTRAS EXTRAS
21