Siemens SINAMICS BOP-2 Operating Instructions Manual page 25

Status
The Status option displays the actual state of the control words and status words that are
used to control and monitor various functions of the Inverter. Information regarding the
control words and the status words can help diagnose problems with the Inverter.
This options displays the current state of the following control and status words:
● Control word 1
● Control word 2
● Status word 1
● Status word 2
The various screens displayed in this menu option are read-only and cannot be modified.
To access the Status options, the following procedure should be performed:
1. Using the
2. Press
3. Using the
4. Press
5. Using the
6. Press
The various status screens are explained below
Control word 1 lower bits
The control words consist of 16 bits of data and the first
8 bits are displayed as shown opposite.
Control word 1 higher bits
The last 8 bits of the control word data is displayed.
Control word 1 hexadecimal value
The value of control word 1 is displayed as a
hexadecimal value.
Basic Operator Panel 2 (BOP-2)
Operating Instructions, 2010-03-01, A5E02778927A AB
and keys navigate to the Diagnostics
screen.
to select the Diagnostics menu.
and keys select the STATUS screen.
to display the selected screen.
and keys scroll up or down through
the various status screens.
to return to the Diagnostic top level menu.
Diagnostics
MONITORING MONITORING CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
STATUS
PARAMETER PARAMETER SETUP SETUP
MONITORING MONITORING CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
CTRL 1 L
01111110
PARAMETER PARAMETER SETUP SETUP
MONITORING MONITORING CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
CTRL 1 H
00000100
PARAMETER PARAMETER SETUP SETUP
MONITORING MONITORING CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
CTRL 1
047E
PARAMETER PARAMETER SETUP SETUP
EXTRAS EXTRAS
EXTRAS EXTRAS
EXTRAS EXTRAS
EXTRAS EXTRAS
25