Siemens SINAMICS BOP-2 Operating Instructions Manual page 38

Setup
Command source
Sets the command source for the Inverter. For Inverters
without fieldbus communications, the command source
default is the Terminals (2) or with fieldbus
communications then the default setting is the Fieldbus
(6).
1. Press
2. Using the
3. Press
Main setpoint
Sets the setpoint source for the Inverter. For Inverters
without fieldbus communications, the command source
default is Analog (2) or with fieldbus communications
then the default setting is the Fieldbus (6).
1. Press
2. Using the
3. Press
Additional setpoint
Sets the second setpoint source for the Inverter. The
default value for this setting is 0, that is, there is no
secondary setpoint source.
1. Press
2. Using the
3. Press
38
to modify the parameter value.
and keys to scroll through the
various options until the required setting is visible.
to confirm the selected value.The display
will automatically display the next parameter in the
commissioning sequence.
to modify the parameter value.
and keys to scroll through the
various options until the required setting is visible.
to confirm the selected value.The display
will automatically display the next parameter in the
commissioning sequence.
to modify the parameter value.
and keys to scroll through the
various options until the required setting is visible.
to confirm the selected value.The display
will automatically display the next parameter in the
commissioning sequence.
MONITORING MONITORING
CMD SRC
P 700
PARAMETER PARAMETER
MONITORING MONITORING
TERMINAL
PARAMETER PARAMETER
MONITORING MONITORING
MAIN SP
P 1000
PARAMETER PARAMETER
MONITORING MONITORING
PARAMETER PARAMETER
MONITORING MONITORING
ADD SP
P 1000
PARAMETER PARAMETER
MONITORING MONITORING
PARAMETER PARAMETER
Basic Operator Panel 2 (BOP-2)
Operating Instructions, 2010-03-01, A5E02778927A AB
CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
SETUP SETUP EXTRAS EXTRAS
CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
2
SETUP SETUP EXTRAS EXTRAS
CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
SETUP SETUP EXTRAS EXTRAS
CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
ANALOG
2
SETUP SETUP EXTRAS EXTRAS
CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
SETUP SETUP EXTRAS EXTRAS
CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
NONE
0
SETUP SETUP EXTRAS EXTRAS