Extras; Extras Menu; Drive Reset - Siemens Sinamics BOP-2 Operating Instructions Manual

Extras

Extras menu

The extras menu allows the user to perform the following functions:
● DRVRESET - reset the Inverter to the factory default settings.
● RAM ─> ROM - copies data from the Inverters RAM to the Inverters ROM.
● FROM CRD - reads parameter data from the memory card into the Inverter memory.
● TO CARD - writes parameter data from the Inverter memory on to the memory card.
● FROM BOP - reads parameter data from the BOP-2 to the Inverter memory.
● TO BOP - writes parameter data from the Inverter memory to the BOP-2.
The actions to perform the previously mentioned functions are shown in the following figures.

Drive reset

Resets the Inverter to the factory default settings.
Image 11-1 Extras - drive reset
Basic Operator Panel 2 (BOP-2)
Operating Instructions, 02/2016, A5E37143404B AA
11
43