Extras - Siemens SINAMICS BOP-2 Operating Instructions Manual

To card
Writes parameter data from the Inverter memory on to
the memory card.
1. Using the
2. Press
3. The parameter set screen will be displayed.
4. Use the
5. Press
6. The confirmation screen will be displayed.
7. Press
8. Press
9. The cloning screen will be displayed briefly.
10. On completion of the cloning process the screen will
11. Press
Basic Operator Panel 2 (BOP-2)
Operating Instructions, 2010-03-01, A5E02778927A AB
and keys select the "TO CRD"
function.
to select the data transfer option.
and keys to change the required
parameter set value. The default is parameter set 0.
to active the data transfer.
to active the data transfer.
to cancel the data transfer.
display "-Done-".
or to return to the "EXTRAS" top-level
menu.
MONITORING MONITORING CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
TO CARD
PARAMETER PARAMETER SETUP SETUP
MONITORING MONITORING CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
PARASET
0
PARAMETER PARAMETER SETUP SETUP
MONITORING MONITORING CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
ESC / OK
PARAMETER PARAMETER SETUP SETUP
MONITORING MONITORING CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
CLONING
000 - 149
PARAMETER PARAMETER SETUP SETUP
MONITORING MONITORING CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
TO CRD
-dOnE-
PARAMETER PARAMETER SETUP SETUP

Extras

EXTRAS EXTRAS
EXTRAS EXTRAS
EXTRAS EXTRAS
EXTRAS EXTRAS
EXTRAS EXTRAS
45