Siemens SINAMICS BOP-2 Operating Instructions Manual page 18

Monitoring
The current output screen shows the actual Inverter
current output to the motor.
This screen shows the actual frequency (in Hz) at which
the motor is running.
This screen displays the actual rotational speed of the
motor in RPM and the actual output current of the
Inverter to the motor.
The voltage and current screen displays the actual
voltage being supplied by the Inverter to the motor and
the actual current out of the Inverter to the motor.
The voltage and rpm screen display the actual voltage
being supplied by the Inverter to the motor and the
actual speed of the motor in rpm.
18
MONITORING MONITORING
CURR OUT
PARAMETER PARAMETER
MONITORING MONITORING
PARAMETER PARAMETER
MONITORING MONITORING
PARAMETER PARAMETER
MONITORING MONITORING
PARAMETER PARAMETER
MONITORING MONITORING
PARAMETER PARAMETER
Basic Operator Panel 2 (BOP-2)
Operating Instructions, 2010-03-01, A5E02778927A AB
CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
10. 0
SETUP SETUP EXTRAS EXTRAS
CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
FREQ
0. 0
SETUP SETUP EXTRAS EXTRAS
CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
0. 0
0. 0 0
SETUP SETUP EXTRAS EXTRAS
CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
400. 0
10. 0
SETUP SETUP EXTRAS EXTRAS
CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
400. 0
1500. 0
SETUP SETUP EXTRAS EXTRAS