Monitoring - Siemens SINAMICS BOP-2 Operating Instructions Manual

Installation
Initial startup
Once the BOP-2 is fitted and powered-up it will automatically detect the type of Control Unit
to which it has been fitted and attempt to automatically establish communications.
On startup the BOP-2 will display the company name and
the class of Operator Panel.
The BOP-2 will then display the current software version of
the Operator Panel.
The BOP-2 will then establish communications between the
Operator Panel and the attached Control Unit.
Once communications have been established, an internal
check is performed to ensure that the Operator Panel is
responding correctly.
Once all checks have been completed the BOP-2 will
display the standard status screen. The BOP-2 is now ready
for use.
If after establishing communications there is a pending fault
or alarm, the BOP-2 will display the relevant fault or alarm
number.
If there is more than one fault or alarm, use the
keys to move through the list on the screen.
16

MONITORING

MONITORING
PARAMETER PARAMETER
MONITORING MONITORING
PARAMETER PARAMETER
MONITORING MONITORING
PARAMETER PARAMETER
MONITORING MONITORING
PARAMETER PARAMETER
MONITORING MONITORING
PARAMETER PARAMETER
MONITORING MONITORING
and
PARAMETER PARAMETER
Basic Operator Panel 2 (BOP-2)
Operating Instructions, 2010-03-01, A5E02778927A AB
CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
SIEMENS
BOP-2
SETUP SETUP EXTRAS EXTRAS
CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
SIEMENS
01. 0 0. 0 0. 0 1
SETUP SETUP EXTRAS EXTRAS
CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
CU BUSY
SETUP SETUP EXTRAS EXTRAS
CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
CU RESP
SETUP SETUP EXTRAS EXTRAS
CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
SP 1500. 0
1500. 0
SETUP SETUP EXTRAS EXTRAS
CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
FAULTS
0. A8752
SETUP SETUP EXTRAS EXTRAS