Basic Operation; Battery Installation - Blaupunkt BAC11AFC Instruction Manual

BASIC OPERATION

Back up Battery Installation
A Battery backup function has been added to this product to assist with keeping the correct
time when the mains power is interrupted for short periods of time.
• Remove the battery compartment cover from the bottom of the unit.
• Insert 2x AAA batteries into the compartment, taking care to match the battery
orientations marked on the inside of the compartment.
• Replace the battery compartment cover.
1.
2.
3.
4.
5.
6.
7.
8
Battery is used for clock back up only to the maintain the clock operation
without LED display when electrical power has been interrupted.
Always remove the battery if the unit is not going to be used for an
extended period of time to avoid unnecessary battery drain.
Use only the size and type of battery specified.
Battery shall not be exposed to direct sunlight or any heat source.
The battery back-up system only meant to be used from short temporary
power failures.
For longer duration the battery may become exhausted or there may be
some deviation in accuracy.
Do not store the clock radio with backup battery fitted, otherwise it will
run down and may leak and corrode.