Wassermann HSS-AZ User Manual

Trimmer
Hide thumbs Also See for HSS-AZ:

Advertisement

Quick Links

Trimmer
HSS-AZ
USER MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HSS-AZ and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Wassermann HSS-AZ

  • Page 1 Trimmer HSS-AZ USER MANUAL...
  • Page 2 Dear customer, Thank you for choosing a product from the Wassermann range. Wassermann Dental- Maschinen incorporates the highest standards of quality and the latest technology. In order to enjoy maximum performance and years of trouble-free operation, please read this user manual carefully before you connect this device and start work, and operate the device according to the recommended guidelines.
  • Page 3: Table Of Contents

    Contents 1 Features............................4 2 Safety Symbols used in this Manual.....................4 3 Safety Guidelines......................... 5 3.1 Potential Dangers..........................6 3.2 Responsibility for Operation or Damage....................6 4 Application............................ 7 5 Before Starting..........................7 5.1 Transport............................... 7 5.2 Installation............................. 7 5.3 Storage..............................8 6 Start-up/ Installation........................
  • Page 4: Features

    Features powerful wet trimmer • highest cutting and polishing speed (HSS-AZ: 3.000 min • can be used with aggressive foil-grinding disc or segmentally diamonded Dia-Quick • grinding disc sturdy, oxidation-free bench with longitudinal slots and side openings – no water •...
  • Page 5: Safety Guidelines

    Do not wear gloves. If you have long hair, wear some form of protection such as a hair net. • When working with the HSS-AZ, do not wear rings, chains, bracelets or • similar jewellery. Be sure to shut off the tap at night and over the weekend.
  • Page 6: Potential Dangers

    The unit has to be maintained and operated in accordance with this user manual. Wassermann Dental-Maschinen GmbH is not responsible for damage arising from the nonobservance of these instructions.
  • Page 7: Application

    Application The HSS-AZ plaster trimmer is used in dental laboratories and is designed exclusively for grinding (trimming) plaster models. To prevent damage to the trimmer and/or to the blade, it must be used only with plaster. Only use the device for this type of application.
  • Page 8: Storage

    You will need the high-pressure hose with the woven insert and a diameter of 1/2 inch – (13 mm) when installing the rinsing water hose. You use the plastic hose with a diameter of 1 inch (25 mm) for the drain hose. Do not install the unit outdoors or in places without proper ventilation.
  • Page 9: Rinsing Water Hose

    Before starting the unit, connect up the following: Rinsing Water Hose Locate the rinsing water hose (thinner hose with woven insert) between the tap and the hose connector on the trimmer. This connector is at the rear, under the motor. Use the clamps already on the hose to connect it, tightening them securely.
  • Page 10: Assambly

    Assambly Installing the Angled Mount The angled mount is inserted as required in the HSS-AZ support plate. Please follow the guidelines below. When working with the angled mount, make sure that it has been installed correctly. It should be installed as shown in the diagram below.
  • Page 11: Operation

    Operation General Operating Instructions All instructions for using the unit, whether in verbal or written form, are based on our own experience and experimentation and can only be regarded as guidelines. After you switch the trimmer on, wait a few seconds for the motor to come up to speed.
  • Page 12: Troubleshooting

    Troubleshooting Fault Cause Solution Water spray at disc Water supply set too high Reduce water pressure at tap or opening ball valve (see 8.2 Water regulation) Drain hose has been Make sure that the diameter of lengthened with a thinner the drain hose is 1 inch hose (25.4 mm)
  • Page 13: Care And Maintenance

    11.2 Maintenance The HSS-AZ plaster model trimmer does not require any maintenance. However, if • you open the disc chamber for cleaning or to change the disc, be sure to clean the sealing surfaces and coat them with a new application of water-insoluble grease.
  • Page 14: Spare Parts

    We assume no responsibility for this. Product responsibility lapses if the equipment is altered by third parties or if non- original parts are installed. Use only original Wassermann spare parts. If damage occurs after a “foreign disc” has been installed, responsibility lies with the person...
  • Page 15: Foil Grinding Discs

    Put back the front plate and make sure the turn locks are really tight. • Removing any superfluous grease. • 11.8 Scope of Delivery/ Accessories HSS-AZ incl. Dia-Quick grinding disc (partly diamonded) Item no.: 162997 HSS-AZ incl. foil grinding disc Item no.: 162996 Incl. In delivery: Item no.
  • Page 16: Warranty

    This warranty does not cover damage caused by improper use, external mechanical causes, transport damage or interference with the unit by unauthorized persons. Technical Data HSS-AZ incl. foil grinding disc Item no.: 162996 Voltage 220–240 V / 50/60 Hz Power consumption 3.0 A, 3.5 A*...
  • Page 17: Disposing Of The Unit

    Disposing of the Unit The unit has to be disposed by an authorized recycling operation. The selected company has to be informed of all possibly health-hazardous residues in the unit. 13.1 Information on Disposal for Countries within the EU To conserve and protect the environment, prevent environmental pollution and improve the recycling of raw materials, the European Commission adopted a directive that requires the manufacturer to accept the return of electrical and electronic units for proper disposal or recycling.
  • Page 18: Eu Declaration Of Conformity

    W A S S E R M A N N Product description: Trimmer for dental Dental-Maschinen GmbH applications Rudorffweg 15-17 21031 Hamburg Germany Model: HSS-AZ incl. Dia-Quick grinding disc Item no.162997 HSS-AZ incl. foil grinding disc Item no.162996 Applicable DIN EN 61010-1 standards: DIN EN 61000-6-3 DIN EN 61000-6-1...
  • Page 19 Notes:...

Table of Contents