Loading A Cartridge - Tandberg Data DLT7000 Reference Manual

Loading a Cartridge

To load a cartridge into the drive (Figure 2):
1. When the green indicator is on steadily, pull the cartridge insert/release handle open
2. Insert the cartridge
3. Push the cartridge into the drive
4. Push the handle closed
NOTE:
To prevent handle failure, assist the handle to the closed position. Do not flip it.
The green indicator turns off and the yellow indicator blinks to show the tape is loading. When the
tape is at the beginning-of-tape (BOT) marker, the yellow indicator turns on steadily. The tape is now
ready for use.
Figure 2 Loading a Cartridge