DEVICE DESCRIPTION
mega macs 50 is a portable diagnostic device for the identification and rectification of faults in vehicle electronic
systems. This manual contains a detailed explanation as to its use etc. All the illustrations are examples.
Uses
Control unit communications:
•
Reading/deleting fault codes
•
Reading parameters and present in graphic form
•
Actuator test
•
Service reset
•
Basic settings
•
Coding
Measuring functions:
•
Voltage, current, resistance, temperature
•
Two-channel multimeter
mega macs 50 TFT display and keypad
If mega macs 50 is connected to a PC, data can be transmitted and printed out. The >Gutmann Portal< programme
must be installed on the PC (see section D4).
Printing
Print window
Diagnosis folder printer
Diagnosis folder e-mail
Remote support enquiry
Start remote
Send protocol data
Key
Function
Print
PRINT
Escape/return
ESC
Function keys
F1
F2
F3
Cursor up/down
Cursor to the right
Cursor to the left
ENTER key
On/off switch
ON/OFF
> Print <
The current window will be printed
The diagnosis folder is opened, and the selected diagnosis printed.
Not yet released
Not yet released
Linked to Gutmann >Remote< programme
Not yet released
3
mega macs 50 Section B 1/3