Procedure Applicable To Mega Macs 50 - Hella Gutmann mega macs 50 User Manual

Procedure applicable to mega macs 50

1. Connect mega macs 50 to a 220 V socket by way of the power supply unit.
CAUTION
During an update, mega macs 50 must be supplied with power through the power supply unit and must not
be disconnected from the power source during the update.
2. Switch on mega macs 50 and call up the > Settings < > Update < menu
Update
Update
System check
3. > Update <
Data transfer ..., data check Helligkeit
Action :Start with ENTER
Interface :USB
File name :xxxxx
File size :123563
File bytes :23456
Update size :1257693576
Total files :245
Faulty files :xxx
4. Start the update.
5. > Update successfully completed < is displayed at the end of the update.
Action Update successfully completed
Interface USB
File name xxxx
File size
File bytes
Update size
Total files
Faulty files 0
6. Switch off mega macs 50.
CAUTION
In every case disconnect mega macs 50 from external power supply, power supply unit or diagnostic plug.
All the new data will be available when mega macs 50 is started next time.
1 mega macs 50 Section D 3/