Hella Gutmann mega macs 50 User Manual page 23

Settings > Simulation <
A program can be called up in the > Simulation < menu, with which the user can practise the use of mega macs 50.
The simulation facility applies to the use of > Reading/deleting fault codes < and > Parameters <.
CAUTION
If a vehicle is connected when the simulation function is active, no communication will be established with the
selected system. The displayed values will be incorrect. The simulation function will no longer be active when
mega macs 50 is started next time.
mega macs 50 > Settings
Display
Company data
Version
Update
Interface
Language
Batteries
System parameters
Simulation
Test function
Diagn. folder
1. Select and confirm > Simulation <.
Simulation
On
Off
2. Select and confirm function.
Info message
Accept setting conclusively?
ENTER (Yes) ESC (No)
3. Confirm the message accordingly.
23 mega macs 50 Section D 1/1