Registering The Device Via The Mega Macs - Hella Gutmann mega macs X Manual

6. | Registering the Device via the mega macs

6. Registering the Device via the mega macs
Proceed as follows to make the device registration via the mega macs and to register the wallbox at Battery Quick Check:
1. Open the mega macs menu with
tivate HV Battery diagnostics PRO.
ð The message "Device successfully registered" appears in the mega macs if the device registration has
been completed successfully.
2. Use the button >Open page for Battery Quick Check< (possible only in the browser) or the QR code to call up the
Battery Quick Check App.
NOTICE
To open the Battery Quick Check App, call up the SDI user interface manually with the Google Chrome/Safari
browser (see Putting the mega macs X into Operation [} 22]).
ð The portal of Battery Quick Check is called up.
3. Add a new wallbox as described in section Registering the Wallbox [} 27].
ð Ensure the Wi-Fi connection between the go-e App and the workshop.
NOTICE
In order to perform a HV Battery diagnostics PRO, you need to create a user and you need to activate the
check box Authorization for HV Battery diagnostics PRO.
Perform the steps in section Creating a New User with the mega macs [} 23] to create a user and to ac-
tivate the Authorization for HV Battery diagnostics PRO.
ð Now you can do a HV Battery diagnostics PRO provided that a user has been created.
ð After having completed the HV Battery diagnostics PRO you will receive a certified status report with the bat-
tery's SoH (State of Health) by e-mail.
26
, go to> Settings > HV Battery diagnostics PRO > Register mega macs to ac-
Hella Gutmann
mega macs