Table of Contents
Advertisement
MULTIMETER
The purpose of mega macs 50 multimeter is to measure voltage, resistance, current and temperatures of vehicle
components.
The measuring parameters for various components are preset in the > Comp. measurement < menu.
Measuring ranges
Voltage/time:
Resistance/time:
Current/time:
Temperature:
CAUTION
Reset the measured value with F1 before every measurement.
The current clamps take account of the technical current direction and are therefore marked with an arrow
which must be aligned in accordance with the intended task.
DANGER
Testing and safety regulations must be observed when carrying out any measurements.
Carry out resistance measurements only on de-energised components.
mega macs 50 > Multimeter
Voltage
Resistance
Current
Voltage/Voltage
Voltage/Current
Temperature
Comp. measurement
1. Select and confirm > Measuring mode <.
0 — 200 V
0 s — 100 s
0 — 1000 kOhm
0 s — 100 s
0 — 400 A
0 s — 100 s
- 30 — + 550 °C
1
mega macs 50 Section M 1/10
Hide quick links:
Advertisement
Table of Contents
