Cleaning And Maintenance - Heinner MG-2100RD Manual

www.heinner.com
XI. CLEANING AND MAINTENANCE
Meat left behind in the cutter housing may be
removed from the inside of the appliance by passing
a slice of bread through the cutter housing.
1. Before you clean the appliance, switch the
appliance off and remove the plug from the
socket.(fig.12)
2. Press the release button and turn the whole
cutter housing in the direction of the arrow. Remove
the pusher and the tray.(fig.13)
3. Unscrew the screw ring and remove all parts of
the cutter housing. Do not clean the parts in the
dishwasher!
4. Wash all parts that have come into contact with
meat in hot soapy water. Clean them immediately
after use.
5. Rinse them with clear hot water and dry them
immediately.
6. We advise you to lubricate the cutter unit and
the grinding discs with some vegetable oil.
2100W, 50/60Hz, 220-240V
9