Technical Specifications - Electrolux TW SL6 E User Manual

Warning! Do not use standard bulbs! These
develop too much heat and may damage the
machine!
Before replacing the bulb, disconnect the mains
plug; with a permanent connection: fully unscrew
or deactivate the fuse.
1. Unscrew cover above the bulb (this can be
found directly behind the loading aperture, at
the top; refer to "Description of machine" sec-
tion.)

Technical specifications

Height x width x depth
Drum volume
Depth with loading door open
Height can be adjusted by
Weight when empty
Loading volume (depends on programme)
Voltage
Required fuse
Total power
Energy efficiency class
Energy consumption (7 kg of cotton, pre-drained
2)
at 1000 rpm)
Average annual energy consumption
Use
Permissible ambient temperature
The consumption values have been established under standard conditions. They may deviate when
Programme
COTTON CUPBOARD DRY
3)
COTTON IRON DRY
SYNTHETICS CUPBOARD DRY
1) different loading volume data may be needed in some countries as a result of different measuring
methods
2) in accordance to EN 61121
3) hints for test institutes: cycle has to be checked in accordance to EN 61121
1)
Consumption values
the machine is operated in domestic circumstances.
3)
3)
2. Replace defective bulb.
3. Screw cover back down.
Check the correct positioning of o-ring gasket be-
fore screwing back the door light cover. Do not
operate the dryer when missing o-ring gasket on
door light cover.
Warning! For safety reasons, the cover must
be screwed down tightly. If this is not done,
the dryer must not be operated.
85 x 60 x 58 cm
108 l
109 cm
1.5 cm
approx. 56 kg
max. 7 kg
220-230 V
6 A
1050 W
A
1.9 kWh
126.2 kWh
Domestic
+ 5°C to + 35°C
Energy consumption in kWh / average drying
time in min.
1.9/ 135 (7 kg load pre-drained at 1000 rpm)
1.7 (7 kg load pre-drained at 1200 rpm)
1.65 (7 kg load pre-drained at 1400 rpm)
1.42 (7 kg load pre-drained at 1800 rpm)
1.4/ 106 (7 kg load pre-drained at 1000 rpm)
0.59/ 48 (3 kg load pre-drained at 1200 rpm)
electrolux 57