Display Ip Interface Brief - H3C WA2600 series Command Reference Manual

ICMP packet input number:
Echo reply:
Unreachable:
Source quench:
Routing redirect:
Echo request:
Router advert:
Router solicit:
Time exceed:
IP header bad:
Timestamp request:
Timestamp reply:
Information request:
Information reply:
Netmask request:
Netmask reply:
Unknown type:

display ip interface brief

Syntax
display ip interface brief [ interface-type [ interface-number ] ]
View
Any view
Default Level
1: Monitor level
Parameters
interface-type: Interface type.
interface-number: Interface number.
Description
Use the display ip interface brief command to display brief information about a specified or all Layer 3
interfaces.
Note that without the interface type and interface number specified, the information about all Layer 3
interfaces is displayed; with only the interface type specified, the information about all Layer 3 interfaces
of the specified type is displayed; with both the interface type and interface number specified, only the
information about the specified interface is displayed.
Related commands: display ip interface.
Examples
# Display brief information about VLAN interfaces.
<Sysname> display ip interface brief vlan-interface
*down: administratively down
(s): spoofing
Field
Total number of ICMP packets received on the interface (the statistics
start at the AP startup), including the following packets:
Echo reply packet
Unreachable packets
Source quench packets
Routing redirect packets
Echo request packets
Router advertisement packets
Router solicitation packets
Time exceeded packets
IP header bad packets
Timestamp request packets
Timestamp reply packets
Information request packets
Information reply packets
Netmask request packets
Netmask reply packets
Unknown type packets
9-3
Description