H3C WA2600 series Command Reference Manual page 17

View
Any view
Default Level
1: Monitor level
Parameters
all: Displays all ARP entries.
dynamic: Displays dynamic ARP entries.
static: Displays static ARP entries.
vlan vlan-id: Displays the ARP entries of the specified VLAN. The VLAN ID ranges from 1 to 4,094.
interface interface-type interface-number: Displays the ARP entries of the interface specified by the
argument interface-type interface-number.
|: Uses a regular expression to specify the ARP entries to be displayed. For more information about
regular expressions, see CLI in the Fundamentals Configuration Guide.
begin: Displays ARP entries from the first one containing the specified string.
exclude: Displays the ARP entries that do not contain the specified string.
include: Displays the ARP entries containing the specified string.
regular-expression: A case-sensitive string for matching, consisting of 1 to 256 characters.
count: Displays the number of ARP entries.
Description
Use the display arp command to display ARP entries in the ARP mapping table.
If no parameter is specified, all ARP entries are displayed.
Related commands: arp static and reset arp.
Examples
# Display the detailed information of all ARP entries.
<Sysname> display arp all
IP Address
20.1.1.1
193.1.1.70
192.168.0.115
Table 4-1 display arp command output description
Field
IP Address
MAC Address
VLAN ID
Interface
Aging
Type
Type: S-Static D-Dynamic
MAC Address VLAN ID
00e0-fc00-0001 N/A
00e0-fe50-6503 100
000d-88f7-9f7d 1
IP address in an ARP entry
MAC address in an ARP entry
VLAN ID contained a static ARP entry
Outbound interface in an ARP entry
Age timer for a dynamic ARP entry in minutes ("N/A" means unknown age timer or
no age timer)
ARP entry type: D stands for dynamic, S for static, and A for authorized.
Interface
N/A
Ethernet1/0/1
Ethernet1/0/2
Description
4-4
Aging Type
N/A S
14 D
18 D