Display Interface Vlan-Interface - H3C WA Series Layer 2 Command Reference

Hide thumbs Also See for WA Series:

page of 133

/ 133
Contents
Table of Contents
Bookmarks

Table of Contents

Default level

2: System level

Parameters

text: Specifies a description for a VLAN or VLAN interface. The string can include case-sensitive letters,

digits, special characters (including ~ ! @ # $ % ^ & * ( ) - _ + = { } [ ] | \ : ; " ' < > , . /), spaces, and

other Unicode characters and symbols.

•

For a VLAN, this is a string of 1 to 32 characters.

For a VLAN interface, this is a string of 1 to 80 characters.

•

NOTE:

Each Unicode character takes the space of two regular characters.

•

To use Unicode characters or symbols in an interface description, install the specific input method editor

•

and log in to the device through remote login software that supports the character type.

When the length of a description string reaches or exceeds the maximum line width on the terminal

•

software, the software starts a new line, possibly breaking a Unicode character into two and creating

garbled characters at the end of a line.

Description

Use description to change the description of the VLAN or VLAN interface.

Use undo description to restore the default.

•

For a VLAN, the default description is the VLAN ID. For example, VLAN 0001.

For a VLAN interface, the default description is the name of the interface. For example,

•

Vlan-interface1 Interface.

You can configure a description to describe the function or connection of a VLAN or VLAN interface,

which is very helpful when a large number of VLANs are created on the device.

Examples

# Change the description of VLAN 2 to sales-private.

<Sysname> system-view

[Sysname] vlan 2

[Sysname-vlan2] description sales-private

# Change the description of VLAN-interface 2 to linktoPC56.

<Sysname> system-view

[Sysname] vlan 2

[Sysname-vlan2] quit

[Sysname] interface vlan-interface 2

[Sysname-Vlan-interface2] description linktoPC56