Charging The Battery - AIPTEK iS2 User Manual

Loading the battery / Using a memory card
1. Pull the battery cover, then it will open automatically.
2. Place the battery into the compartment. Align the + and - metallic ends carefully.
Note that the + and - metallic contacts must be aligned with the corresponding contacts in
the compartment.
Once you open the battery cover, the power of camera will be cut off.
3. Insert a SD/SDHC card (sold separately) into the slot until it clicks into place.
To remove the card, push the card to release it and then pull it out gently.
4. Replace the battery cover.

Charging the battery

Before charging:
• Power off the unit first and make sure the Li-ion battery is installed.
• Make sure your PC is powered on during the charge.
• It is recommended to charge the battery for at least 8 hours before the first time
usage.
1. By adaptor:
Assemble the adaptor with USB cable and plug
into the AC outlet. Then connect the camera's
USB port to the mini-USB end of cable and begin
to charge.
2. By PC:
Connect the camera's mini USB port to a PC /
notebook USB port by USB to mini-USB cable and
the charge will begin.
The power indicator lights orange in the charge progress. When the charge is complete, the
power indicator goes out.
2