Charging The Battery - Usb Charging - AIPTEK POCKET DV M1 User Manual

Charging the battery - USB charging

1
Install one battery into the camcorder.
Make sure the battery is correctly installed and well clinched by the drop
prevention lever.
2
Power on your computer and
connect one end of the USB
cable into the computer.
Make sure the connector and the USB port are
correctly aligned.
3
Connect the other end of the
USB cable to the camcorder.
Connect the other end of the USB cable to
the camcorder. Select [Charger] in the pop-up
menu, and the charge will start to take place.
Note: If the [USB Mode] setting is changed,
the menu will not show up. See page 33 for
more details.
4
The battery is being charged.
The LED light will flash rapidly. As the battery is
gradually getting power, the flash will get more
and more slowly.
5
Unplug the USB cable when the
charge is done.
When the battery is fully charged, the LED will
emit steady light.
2
3
Select [Charger] to start
charging
8