MAJORITY Teton - Soundbar Manual

CONTROLS & FUNCTIONS

FRONT, SIDE, AND REAR VIEW

1. Speaker drivers
2. Remote control sensor
3. LED Indicator Light
   
4. On/Off
5. Change mode (BT, OPTICAL, AUX, RCA, USB, ARC).
6. Adjust volume
7. AUX in socket
8. Bluetooth pair button
   
9. USB socket
10. RCA socket
11. ARC/HDMI in socket
12. OPTICAL in socket
13. DC 18V socket

REMOTE CONTROL

14. Power on/off
15. Bass increase/decrease
16. Volume +
17. Back: Use in Bluetooth and USB modes to go back a track.
18. Play/Pause: In Bluetooth/USB mode, press to pause/play media.
19. Volume -
20. Treble increase/decrease
21. Media modes: Select Music, Dialogue or Movie EQ mode
22. Flat: Press to reset EQ settings to default
23. Mute/Unmute
24. Input: Press to switch between modes
25. Forward Step: Use in Bluetooth/USB mode to go forward a track.
26. Pair: Press to connect/disconnect from a Bluetooth device

WHAT'S IN THE BOX?

1. Majority Teton Soundbar
2. Remote Control
3. 3.5mm to 3.5mm Audio cable
4. RCA Stereo Audio Cable
5. Power Adapter

Note: Remote control (B) requires 2 x AAA batteries (not included). It is recommended to use alkaline or heavy duty batteries as this will ensure a longer playtime.

ADDITIONAL INFO

Automatic Power Off Function

The Majority Teton will automatically go to standby mode after 180 minutes if the connected TV is switched off, or if there is any audio signal in.

Wall mounting

The Majority Teton can be mounted to a wall using the appropriate fittings for your wall type by using the wall mounting brackets positioned at the rear of the unit. As these differ between wall types the fittings are not included. To wall mount the Teton soundbar, the appropriate fittings for your application will need to be sourced.

MODE INDICATOR LIGHTS & AUDIO SETTINGS

MODE INDICATOR LIGHTS

AUDIO SETTINGS

USB INPUT

USING THE USB INPUT

1. Connect your USB device to the USB jack (Ref.9) on the soundbar.
2. Press the 'INPUT' button (Ref.24) on the remote, and the LED indicator will be Purple.
3. Play music files from the USB device through the soundbar.

RCA INPUT

USING THE RCA INPUT

Use the RCA Stereo Audio Cable to connect the TV's stereo RCA(L/R) audio output socket to the RCA(L/R) Sockets of the unit (Ref.10).

Then press the INPUT button on the remote control (Ref.24) or press the INPUT button on the soundbar (Ref.5) to choose the AUX function.

Troubleshooting: If you are not receiving a picture or encountering interference, please ensure that the RCA cable is being connected to 'output' RCA ports on your TV set. This will ensure that the sound is being exported correctly.

If your TV does not have 'output' RCA ports, please use an alternative connection method.

ARC INPUT

USING THE ARC (HDMI) INPUT

Connect the HDMI cable (included) to the HDMI ARC connector on the back of the unit to the HDMI (ARC) connector on the TV.

NOTE: In the HDMI ARC mode, if your speakers have no audio output and the indicator light is flashing quickly, use your source device (such as a TV, CD player, or cable/satellite receiver).The audio output mode is set to PCM, or turn off the sound source output.

The transmission of digital audio signals between devices is not workable for all the TV brands in the markets because the branded TVs are not cross-brand compatibility to each other.

OPTICAL INPUT

USING THE OPTICAL INPUT

You will need: An audio source with an Optical Audio Output and a Digital Optical Audio cable (included).
Connect the Digital Optical Audio cable to the optical output on the audio source and to the Optical Input on the soundbar (Ref.12).
Press the POWER button on the side panel (Ref.4) or on the remote control (Ref.14) to switch on the unit.
Press the INPUT button on the remote control repeatedly (Ref.24) to switch to Optical mode or press the INPUT button (Ref.5) repeatedly on the soundbar to select Optical mode. The mode indicator LED will turn yellow.
Using the native controls on your connected device, make sure the audio settings are set to PCM or Optical Audio and are switched on.
Audio from the connected audio source will now be played through the speakers.

AUX/LINE IN INPUT

USING THE MP3 LINK CONNECTION (AUX IN)

Plug one end of a 3.5mm audio input cable (included) into the Line in (Ref.7) on the unit. Before use, disconnect any cables connected to the Stereo RCA Inputs. Plug the other end of the cable into the audio output/ headphone output on an MP3 player or other audio source.
Press the POWER button on the side panel (Ref.4) or on the remote control (Ref.11) to switch on the unit.
Press the INPUT button repeatedly on the soundbar (Ref.5) or press INPUT on the remote control (Ref.24) repeatedly until LINE in mode is selected. The mode indicator will turn green.
Audio played through the connected device will now be heard through the speakers.

CONNECTING TO THE POWER OUTLET

CONNECTING TO THE MAINS SUPPLY

Ensure that the power supply voltage is within the range of 100V~240V. Any other voltage may cause damage to the unit.
Unwind the mains cable to its full length. Connect the mains plug to a mains socket.
Ensure that the mains plug is fully inserted into the mains socket.
The mains plug/appliance coupler is used as the disconnect device. The disconnect device must remain readily operable.
Connect the adapter into the soundbar AC Socket (Ref.13).

Ensure all audio connections of the unit are connected before connecting to the mains power socket. Unplug the power cord from the outlet when the unit is use for an extended period of time.

BLUETOOTH OPERATION

Pairing a Bluetooth Device for the First Time

Press the POWER button on the soundbar (Ref.4) or on the remote control (Ref.14) to switch on the unit.

Press the INPUT button repeatedly on the remote control (Ref.24) or press the INPUT button on the soundbar (Ref.5) repeatedly until Bluetooth mode is selected (indicated by a flashing blue light).

From your Bluetooth device, select the "Majority Teton" when prompted to choose a Bluetooth device.

If a password is required, enter "0000". If you encounter issues at this stage, please refer to the user manual for your Bluetooth device for instructions on pairing and connecting Bluetooth devices.

When successfully connected, a beep will issue from the unit and a solid blue light will be displayed. After initial pairing, the unit will stay paired unless manually unpaired by the user, or until the device is reset.

If your device should become unpaired or you find it is unable to connect, repeat the above steps.

TROUBLESHOOTING

If you encounter an issue with your soundbar, please refer to the following checklist.

SPECIFICATION

SUPPORT

If you require further assistance with your new soundbar, please contact our support team on the Majority website: www.majority.co.uk/support

SAFETY INFORMATION

1. Read these instructions.
2. Keep these instructions. Instructions are also available for download at www.majority.co.uk
3. Heed all Warnings
4. Follow all instructions
5. Do not clean the apparatus near or with water
6. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
8. Protect the power from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
9. Only use attachments/accessories specified by the manufacturer.
10. Unplug this apparatus during light storms or when unused for long periods of time.
11. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in a way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to the rain or moisture, does not operate normally or has been dropped.
12. No naked flame sources, such as lit candles, should be placed on the apparatus.
13. Dispose of used electrical products and batteries safely according to your local authority and regulations.

ADDITIONAL WARNINGS

The apparatus shall not be exposed to dripping or splashing and no objects filled with liquid, such as vases, shall be places on the apparatus.

Main plug is used to disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the main mains completely, the mains plug should be disconnected from the main socket outlet completely.

Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

Please read all instructions carefully before use and keep for future reference.

Risk of electric shock.
Do not open

Read all instructions carefully before use and keep for future reference

When servicing, use only identical replacement parts

WWW.MAJORITY.CO.UK

Documents / Resources

References

• Majority – Home Audio | DAB & Internet Radios | Soundbars
• Support – Majority
• Majority – Home Audio | DAB & Internet Radios | Soundbars

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download MAJORITY Teton - Soundbar Manual