MAJORITY Snowdon SNO-BAR-BLK-2 - Soundbar Manual

Controls And Functions

Side View / Control Buttons

1. Switch on and o the unit
2. Select the modes
3. Volume up
4. Volume down
5. Bluetooth pair button
6. Line in socket

Back View / Connections

7. AUX socket
8. OPTICAL IN socket
9. DC IN (18V) socket

Remote Control

11. Power On/Off
    Switch the unit between on and Standby mode
12. Bass increase/decrease
    Select to adjust the bass
13. Volume +
    Press to increase the volume
14. Back Step
    Use in Bluetooth mode to go back a track.
15. Play/Pause
    In Bluetooth mode, press to pause/ play media.
16. Volume -
    Press to decrease the volume
17. Treble increase/decrease
    Select to adjust the treble
18. Media Modes: Music, Dialogue or Movie
    Press relevant button for the media type for the best sound quality
19. FLAT
    Press button to restore to default sound settings.
    Controls And Functions
20. MUTE
    Press to mute and unmute sound.
21. INPUT
    Press repeatedly to switch between modes
22. Forward Step
    Use in Bluetooth mode to go forward a track.
23. PAIR
    In Bluetooth mode, press to pair with your device. Press again to disconnect.

Using the Remote Control

The remote control sensor at the front of the soundbar is sensitive to the remote control's commands up to a maximum of 6 metres away and within a maximum arc of 40 degrees.

Please note that the operating distance may vary depending on the brightness of the room.

What's In The Box?

1. Majority Snowdon Soundbar
2. Remote Control
3. Adapter
4. 3.5mm to 3.5mm Audio cable
5. RCA Stereo Audio Cable
6. Instructions Guide

Support

Please follow the guidance of the manual to set up your soundbar and enjoy its fantastic features.

If you require further assistance with your new soundbar, please contact our support team on the Majority website:
https://www.majority.co.uk/support

Instructions Guide

Fixing the Soundbar

Ensure the TV or Vision Device is placed properly.

Mode Indicator Lights

Audio Settings

Using the AUX Connection

Use the RCA Stereo Audio Cable to connect the TV's stereo RCA(L/R) audio output socket to the AUX(L/R) Sockets of the unit.

Then press the INPUT button on the remote control (Ref.21) or press the Source button on the soundbar (Ref.2) to choose the AUX function.

Turn on your television set to use the Majority Snowdon II.

Troubleshooting: If you are not receiving a picture or encountering interference, please ensure that the RCA cable is being connected to 'output' RCA ports on your TV set. This will ensure that the sound is being exported correctly.

If your TV does not have 'output' RCA ports, please use an alternative connection method.

Using the Optical Input

You will need: An audio source with an Optical Audio Output and a Digital Optical Audio cable (not included)

Connect the Digital Optical Audio cable to the optical output on the audio source and to the Optical Input on the speaker bar.

Press the POWER button on the side panel (Ref.1) or POWER button directly on the remote control (Ref.11) to switch on the unit.

Press the INPUT button on the remote control repeatedly (Ref.21) to switch to Optical mode or press the SOURCE button (Ref.2) repeatedly on the soundbar to select the Optical mode.
The mode indicator LED will turn Yellow.

Using the native controls on your connected device, make sure the audio settings are set to PCM or Optical Audio and are turned On.

Audio from the connected audio source will now be played through the speakers.

Using the MP3 LINK Connection (Line In)

Plug one end of a 3.5mm audio input cable (included) into the Line in (Ref.6) on the unit. Before use, disconnect any cables connected to the Stereo RCA Inputs.

Plug the other end of the cable into the audio output/ headphone output on an MP3 player or other audio source.

Press the POWER button on side panel (Ref.1) or POWER button directly on the remote control (Ref.11) to switch on the unit.

Press the SOURCE button repeatedly on the soundbar (Ref.2) or press INPUT button on remote control (Ref.21) repeatedly until on LINE in mode. The mode indicator will turn green.

Audio played through the connected device will now be heard through the speakers.

Connecting to the Mains Supply

Ensure that the power supply voltage is in the voltage of 100V~240V.

This unit is designed to use adapter.

Connecting the unit to any other power source may cause damage to the unit.

Unwind the mains cable to its full length. Connect the mains plug to a mains socket. Make sure the mains plug is fully inserted into the mains socket.

The mains plug/appliance coupler is used as the disconnect device, the disconnect device must remain readily operable.

Connect the Adapter into the soundbar AC Socket (Ref.3)

Ensure all audio connections of the unit are connected before connecting to the mains power socket
Unplug the power cord from the outlet when the unit is use for an extended period of time.

Bluetooth Operation

Pairing a Bluetooth Device for the First Time

Press the POWER button on the soundbar (Ref.1) or the POWER button on the remote control (Ref.11) to switch on the unit.

Press the INPUT button repeatedly on the remote control (Ref.21) or press the SOURCE button on the soundbar (Ref.2) repeatedly until in Bluetooth mode, indicated by a flashing blue light.

Using the native controls on your Bluetooth device, select the "Majority Snowdon II" in your Bluetooth settings to pair.

If your device requests a password, enter the default "0000". Refer to the "user manual" for your specific device for instructions on pairing and connecting Bluetooth devices.

When successfully paired and connected, a beep will issue from the unit and the Pairing Indicator will display a solid blue light. After initial pairing, the unit will stay paired unless unpaired manually by the user, or until it is erased due to a reset of the device.

If your device should become unpaired or you find it is unable to connect, repeat the above steps.

Playing Audio Wirelessly

Follow the instructions for Pairing a Bluetooth Device.
Use the native controls on the connected Bluetooth Device to select a track.
To play, pause or skip the selected track, use the native controls on the connected Bluetooth Device.
Audio played through the connected Bluetooth device will now be heard through the speakers.

Troubleshooting

If the Soundbar does not work properly as desired, please check the following checklist.

Specifications

Safety Information

1. Read these instructions.
2. Keep these instructions. Instructions are also available for download at www.majority.co.uk
3. Heed all Warnings
4. Follow all instructions
5. Do no clean the apparatus near or with water
6. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Protect the power from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Unplug this apparatus during light storms or when unused for long periods of time.
12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in a way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to the rain or moisture, does not operate normally or has been dropped.
13. No naked flame sources, such as lit candles, should be placed on the apparatus.
14. Dispose of used electrical products and batteries safely according to your local authority and regulations.

ADDITIONAL WARNINGS

The apparatus shall not be exposed to dripping or splashing and no objects filled with liquid, such as vases, shall be places on the apparatus.
Main plug is used to disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the main mains completely, the mains plug should be disconnected from the main socket outlet completely. Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

Please read all instructions carefully before use and keep for future reference.

Risk of electric shock.
Do not open

Read all instructions carefully before use and keep for future reference

When servicing, use only identical replacement parts

www.majorityradios.co.uk

Documents / Resources

References

• Support – Majority
• Majority – Home Audio | DAB & Internet Radios | Soundbars
• Majority – Home Audio | DAB & Internet Radios | Soundbars

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download MAJORITY Snowdon SNO-BAR-BLK-2 - Soundbar Manual