How To Use; Operation; Setting Up; Filling In The Food To Be Fried - Silvercrest SHF 1500 A1 Operating Instructions Manual

Hot air fryer
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 22

6. How to use

• Remove all packing material.
• Check whether all accessories are pres-
ent and undamaged.
• Before first use, wash the pan 10 and
the frying basket 6 by hand using warm
water and a mild detergent, and then
dry all parts very thoroughly (see
"Cleaning the hot air fryer and the han-
dle" on page 30).
• Wipe off the hot air fryer 12 with a
slightly damp cloth.
• Place the device 12 on a dry, level,
non-slip surface. This surface should
also be heat-resistant and not be dam-
aged by splashes of hot fat.
• Insert the plug 13 into a wall socket cor-
responding to the specifications of the
rating plate. The wall socket must also
be easy to reach after switching on the
device.
NOTE: when in operation for the first time,
some smoke and odour may be generated
by the device. This is due to the assembly
materials used for the heating element and
is not a fault in the product. Ensure adequate
ventilation.
28 GB

7. Operation

DANGER of burns!
The device 12 should only be operated
with dry hands.
During frying, hot steam escapes from
the air outlet 14. Be careful not to put
your hands into the steam.
In no event the hot air fryer 12 should
be moved as long as it is still hot!

7.1 Setting up

• All parts of the hot air fryer 12 must be
completely dry, when you use the de-
vice.
• Put the hot air fryer on a stable, level,
non-slip, dry, and non-flammable work
surface.
• Do not use the hot air fryer directly un-
der wall units and not near to any cur-
tains, paper or any similar flammable
objects.
• Do not place the device directly under a
wall socket.
• Keep a distance of at least 50 cm on all
sides.
7.2 Filling in the food to be
fried
1. Figure A: use the handle 9 of the fry-
ing basket to pull the pan 10 and the
frying basket 6 out of the device.
2. Place the complete, cooled-down unit
on a level, non-slip surface.
CAUTION:
If you have preheated, the hot pan 10
must be placed on a heat-resistant sur-
face.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents