Kenwood NX-5300 Service Manual page 52

Item Condition
Panel tuning
mode
[NXDN 1) Adj item:
Very [Nv NDEV]
Narrow] Adjust:[****]
Deviation meter
LPF: 3kHz
HPF: OFF
2) Adj item:
[Low1]→
[Low3]→
[Low5]→
[Center1]→
[Center3]→
[Center5]→
[High2]→
[High4]→
[High6]
*F5,F6,K5,K6
type only: Press
and hold the
[Right] key to en-
ter [Center1]
(Over Lap
High)→
Adjust:[****]
PTT : ON
Press [ ] key to
store the adjust-
ment value.
11. QT 1) Adj item:
Devia- [Aw QT]
tion *3 Adjust:[****]
Deviation meter
[Analog LPF: 3kHz
Wide] HPF: OFF
2) Adj item:
[Low1]→
[Low3]→
[Low5]→
[Center1]→
[Center3]→
[Center5]→
[High2]→
[High4]→
[High6]
Adjust:[****]
PTT : ON
Press [ ] key to
store the adjust-
ment value.
1-52 (No.RA015<Rev.002>)
Measurement
PC test mode Test-
equip-
ment
1) Adj item: Devia-
[NXDN High Devia- tion
tion (NXDN Very meter
Narrow] Oscil-
Deviation meter lo-
LPF: 3kHz scope
HPF: OFF
2) Adj item:
[Low1]→
[Low3]→
[Low5]→
[Center1]→
[Center3]→
[Center5]→
[High2]→
[High4]→
[High6]
*F5,F6,K5,K6 type
only: [Center1]
(Over Lap High)→
Press [Transmit]
button.
Press [Apply All]
button to store the
adjustment value.
1) Adj item: Devia-
[QT Deviation (Ana- tion
log Wide)] meter
Deviation meter Oscil-
LPF: 3kHz lo-
HPF: OFF scope
2) Adj item:
[Low1]→
[Low3]→
[Low5]→
[Center1]→
[Center3]→
[Center5]→
[High2]→
[High4]→
[High6]
Press [Transmit]
button.
Press [Apply All]
button to store the
adjustment value.
Unit Ter- Unit Parts
minal
Panel ANT Panel [Panel
tuning
mode]
[],
[]
[PC
test
mode]
[←],
[→]
Panel ANT Panel [Panel
tuning
mode]
[],
[]
[PC
test
mode]
[←],
[→]
Adjustment
Method
Write fixed value "489" 1311~1363Hz
(F2,F3,K2,K3),"492"
(F5,F6,K5,K6) for each [PC test
adjustment point. Trans- mode]
mit at each adjustment Press [Apply
point and check that the All] button to
deviation is between store the
1331Hz and 1363Hz. adjustment
Deviation meter value after all
LPF: 3kHz adjustment
HPF: OFF points have
been adjust-
[Panel tuning mode] ed.
PTT: ON
[PC test mode]
PTT: Press [Transmit]
button
Write the value as fol- 0.75kHz±0.05
lowings. 513 (Reference kHz
value)
Specifica-
tions
/Remarks