Kenwood NX-5300 Service Manual page 38

Adjustment Item Description
Sensitivity 2 The gain of RF amplifier is adjusted.
The performance of the interfering wave is
improved.
Sensitivity 3 Not used
RSSI Reference The minimum RSSI level for scan stop is
adjusted.
Open Squelch The squelch level at level "1" is adjusted.
Low RSSI RSSI display level "
Both "Low RSSI" and "High RSSI" must be
High RSSI
adjusted. (The curve data of RSSI level is
applied.)
4.3.5 Adjustment item and Display
Order Adjusutment Main
item LCD
display
1 Receive Assist RAST
2 Transmit Assist TAST
3 RTC Correction RTC
4 Ramp Up Offset RAMPU (ADC measurement
5 Ramp Down RAMPD (ADC measurement
Offset
6 High Transmit H_PWR -
Power
7 Medium Transmit M_PWR -
Power
8 Low Transmit L_PWR
Power
9 Balance BAL
10 Maximum ADEV
Deviation
11 P25 High PDEV
Deviation
12 P25 H-CPM P2DEV
Deviation
13 NXDN High NDEV
Deviation
14 QT Deviation QT
15 DQT Deviation DQT
1-38 (No.RA015<Rev.002>)
" is adjusted.
Sub LCD Aw
display (Analog
Wide)
(CV voltage)
17 point ADJ
~
1 4096
(CV voltage)
17 point ADJ
~
1 4096
-
-
-2.00~-0.01 ,0.00 ,+0.01~+2.00
-
value)
1~1024
-
value)
1~1024
-
1~1024
-
1~1024
- -
1~1024
(Encode frequency) -
1~1024
- 9
1~1024
- -
1~1024
- -
1~1024
- -
1~1024
- 9
1~1024
- 9
1~1024
Adjustment Item Description
Tight Squelch The squelch level at level "9" is adjusted.
Battery Warning Battery Warning Level (LED blinking level)
Level is adjusted.
Battery Warning Level minus 0.4V is the
transmission inhibited level.
Internal Microphone Internal Microphone Gain is adjusted.
Gain This item can be adjusted only in PC Test
Mode.
As *2 An P1
(Analog (Analog (P25
Wide 4k) Narrow) Phase1)
Adjustment range
- 5 -
- 5 -
- 5 -
- 9 -
9 *2 9 -
- - 9
- - -
- - -
9 *2 9 -
9 *2 9 -
P2 Nn Nv
(P25 (NXDN (NXDN
Phase2) Nar- Very
row) Nar-
row)
Common
Section 2
Common
Section 3
Common
Section 5
Transmitter
Section 1
Transmitter
Section 2
- - - Transmitter
Section 3
- - - Transmitter
Section 4
- - - Transmitter
Section 5
- - - Transmitter
Section 6
- - - Transmitter
Section 7
- - - Transmitter
Section 8
9 - - Transmitter
Section 9
- 9 9 Transmitter
Section 10
- - - Transmitter
Section 11
- - - Transmitter
Section 12
Adjust
item
Number