Advertisement
Quick Links
Pneumatic Directional Control Valve
Designed around the same
spool and seal design that
has proven itself for dec-
ades, this valve now offers
integrated solenoid opera-
tors and wire way, a simpli-
fied sub base that allows
mounting to most in service
stock, mounting risers, a
latching protection cover and
provides cost savings to the
car owner without sacrificing
critical design features.
SM-300.95
SuperSpool™ RCV
Part No. R434000181
SERVICE INFORMATION
The
SuperSpool
Valve is the latest version
of the SuperSpool valve
family that has successfully
served the railcar hopper
door market for over 30
years.
OPEN
RCV
CLOSE
Advertisement
Related Manuals for Aventics SuperSpool RCV
Summary of Contents for Aventics SuperSpool RCV
- Page 1 SuperSpool™ RCV Pneumatic Directional Control Valve Part No. R434000181 SERVICE INFORMATION SuperSpool Valve is the latest version of the SuperSpool valve family that has successfully served the railcar hopper door market for over 30 years. Designed around the same spool and seal design that has proven itself for dec- ades, this valve now offers integrated solenoid opera-...
-
Page 2: Installation
WARNING: INSTALLATION AND MOUNTING trouble-free service, an efficient air The user of these devices must line filter should be installed on the conform to all applicable electrical, mechanical, piping and other codes in supply side of the valve. Since this the installation, operation or repair of application has a very low cycle rate, an air line lubricator is not required. -
Page 3: Operation
Valve “SUPPLY” port: Supply air Valve “DEL. PORT ‘B’ ”: To cap end of cylinder Valve “DEL. PORT ‘A’ “: To piston rod end of cylinder Figure 1: Typical Valve Configuration The exhaust port is typically left open to atmosphere in this application. A muffler or insect excluder may be installed if desired, but care should be taken to assure that it is the free-flow type and that it is not a design that will clog up with coal dust over time. - Page 4 The SuperSpool™ RCV valve is a high flow, Replace any parts that are damaged or worn, four ported, four-way directional control valve featuring giving particular attention to the spool and seal rings. double 24 Vdc solenoid operators. This valve also uti- Repair kit part numbers are identified on page 6.
- Page 5 Repair Kits & Parts for SuperSpool™ RCV R434000736: Rubber Overhaul Kit and Hardware Items R434000737: Wiring Elements (includes 2 diode harnesses & ground wire harness) R434000738: Replacement Diodes (6) (fits all valves) R434000524: 24 VDC Solenoid Operator Assembly (fits either end, 2 per valve req’d) R434000104: Replacement Spool...
- Page 6 2: Typical Valve Exploded View Page 6...
- Page 7 Figure 3: Typical Valve Wiring Connections Page 7...
- Page 8 Buyer’s sole and exclusive remedy under this warranty shall be limited to the repair or exchange of warranted products at AVENTICS’ option FOB AVENTICS’ factory. No attempt to repair or improve the Goods or parts by any of AVENTICS’ representatives shall change or extend this warranty.