Section 2: General
February 2019
2.6
Direction of Rotation
Unless specifically ordered otherwise, the standard direction is (see Figure 5 and Figure 6):
•
•
Clockwise rotation of the actuator is given when the output shaft turns counter clockwise
when looking on the output shaft.
Figure 5
Figure 6
CAUTION: OBSERVE DIRECTION OF ROTATION
All specifications in this operating manual refer to the standard direction of rotation.
7
Right turning (clockwise) = CLOSING
Left turning (counter clockwise) = OPENING
Clockwise = Close
Counterclockwise = Close
User Instructions
MAN-02-04-60-0350-EN Rev. 3
General