Mitsubishi Electric MELSEC Q Series Quick Start Manual page 39

 Monitoring device values and status <Device monitor>
The followings are the two types of device monitor.
Type
Device batch monitor
Entry data monitor
 Device batch monitor
Monitors consecutive devices by specifying the start device number.
Operating procedure
* The "Device batch monitor" screen can be displayed by selecting [Device batch] with a right click
on the ladder screen.
To the next page
Purpose
Used to monitor consecutive devices of one type.
Used to simultaneously monitor separately-located devices in
the ladder or various devices on one screen.
1 Select [Online] [Monitor]
[Monitor (Write mode)]
( key) ( ).
2 Select [Online] [Monitor]
[Device batch] ( ).
3 Enter the start device number
to be monitored on the "Device
batch monitor" screen.
4 Click the button.
37