Mounting Modules - Mitsubishi Electric MELSEC Q Series Quick Start Manual

3 Mounting Modules

Mount prepared modules on the base unit.
A battery connector must be installed when using the CPU module for the first time.
Caution
The power supply must be disconnected when mounting modules.
 Mounting modules
1 Insert a module fixing
projection into a module
fixing hole on the base
unit.
2 Push the module in the
direction of arrow until
it clicks.
Complete
P
oint
 Installing a battery in the CPU module
1 Open the cover at the
bottom of the CPU module.
2 Insert the connector of
battery into the connector
of CPU module.
3 Close the cover at the
bottom of the CPU module.
Complete
10
Base unit
Module
Module Module fixing
fixing hole
projection
Connector of
CPU module
2
Connector of
battery
CPU module
3
Side view
Base unit
Module fixing
projection
Module
fixing hole Module
Side view
Battery