Step 9 Wallcontrol 10 (Optional) - Datapath VSN Series Quick Start Manual

STEP 9 WALLCONTROL 10 (OPTIONAL)

Before opening the WallControl 10Client interface you may need to start the
WallControl 10 Server should it not start automatically. The Server icon is displayed
in the System Tray.
Server icon
If the Server fails to start automatically, start the Server by clicking on it in the
"All Programs" menu. The WallControl 10 Client will only detect servers that are
running.
Start | All Programs | WallControl 10 - Server
Open the WallControl 10 Client
Start | All Programs | WallControl 10 - Client
The WallControl 10 - Client
3
4 5
1 Indicates the server you are connected too.
2 A representation of the display wall associated with the server.
3 Sources Tab - Displaying all the sources connected to the server for use on
your display wall.
4 Layouts Tab - Use to save, recall and share display wall layout configurations.
5 Templates Tab - Use templates to assist in the design of specific display wall
layouts.
Page 12
1
2