Advertisement
Material list
Handset
Part
Main display
side
Sub display
side
Side surface of
main display
side
Side surface of
sub display
Surface of
side
the handset
Keyboard side
Side surface of
keyboard side
Back of
keyboard side
Hinge
Side surface of
hinge section
Camera panel
Operation key (including
ornament)
Side Key
Quick open button
Charging terminal
External connector terminal
Infrared port
Metal part
microSD
Card slot
Resin section
docomo nano UIM card tray
Sticker
Battery
Resin section
storage side
Metal part
Surrounding
Battery
area of battery
storage
storage section
section
Screw
Battery terminal
Battery
connector
terminal
Battery terminal Copper alloy/Gold plating
Fitting cover
Material/Surface treatment
PC, PMMA resin/Hard coating
PC, PMMA resin/Hard coating
Polyamide resin with glass/UV
coating
Aluminum/Anodizing
UV cured resin
Polyamide resin with glass/UV
coating
PC+ABS-GF20 resin/UV coating
Polyamide resin with glass/UV
coating
ABS resin/UV coating
PC, PMMA resin/Hard coating
UV cured resin
PC resin/UV coating
PC resin
Aluminum/Anodizing
SUS/au plating
Copper alloy/Gold plating
ABS resin/Hard coating
STAINLESS
LCP
POM
PET
PC+ABS-GF20 resin
Nickel silver
PC+ABS-GF20 resin
SUS/Passivation coating
PA4T
UV cured resin
Back Cover SH76
Part
Back cover
Gasket
Battery Pack SH44
Part
Battery pack
Terminal section
Water wet determination seal
Label
Desktop Holder SH49
Part
Desktop holder (top case/
bottom case)
Terminal lever
Lock lever
Charging terminal
Metal section of connecting
terminal
Screw
Rubber base
Production lot label
Handling precautions
General notes
SH-01J is waterproof, however, do not allow water to get
inside the handset and do not allow accessories or optional
parts to get wet.
The battery pack, adapter, desktop holder and docomo nano
UIM card are not waterproof. Do not use in humid or steamy
areas such as bathrooms and avoid exposing to rain and other
forms of moisture. If they are carried close to the skin,
perspiration may cause internal components to corrode and
result in malfunction. Note that if a problem is found to be due to
moisture, the handset and parts are not covered by warranty
and in some cases may be irreparable. Even when repairs are
possible, repair charges will be incurred, since the damage is
not covered by warranty.
Clean only with a soft and dry cloth (such as the type used
for eyeglasses).
Forceful rubbing of the display with a dry cloth etc. may
scratch its surface.
Water drops, dirt, etc. left on the display may cause stains to
form on its surface.
Never use chemicals such as alcohol, thinners, benzene or
detergents, as these agents may erase the printing or cause
discoloration.
Occasionally clean terminals with a dry cotton swab etc.
Dirty terminals may result in poor connections and loss of power
or insufficient battery charge. Keep the terminals clean with a
dry cotton swab etc.
Be careful with the terminals while cleaning them.
7
Material/Surface treatment
PC+ABS-GF20 resin/UV coating
EPDM/Low friction coating
Material/Surface treatment
PC resin
Copper alloy/Gold plating
High quality paper/PET
PET/mat varnish paper
材質／表面処理
ABS resin/Grain finish
POM resin
POM resin
Phosphor bronze/Gold plating
SUS
Carbon steel for cold heading/
Trivalent black chromate
Foamed urethane
Polyester film
Contents/Precautions
Advertisement
