Advertisement
If the access point you want to connect to is not displayed:
z
▶
[Refresh] to scan for access point again.
When you select an access point and connect to it with a
wrong password (security key), [IP Configuration Failure], [WiFi
Connection Failure], [Authentication problem] or [Connected
(Limited)] is displayed. Confirm the password (security key).
When [IP Configuration Failure] or [Connected (Limited)] is
displayed after entering the correct password (security key),
you may not have acquired the correct IP address. Connect to
the access point again after confirming signal status.
The registration process using WPS takes a few minutes. After
completion of the registration of the access point, check that
the proper connection to the access point is acquired.
As for the manual registration of an access point, this function
supports WEP, WPA/WPA2 PSK and 802.1xEAP as the
security setting.
If you connect to an access point which is not connected to the
Internet, [
] is displayed and the communication may be
made by mobile networks, not Wi-Fi connection.
To make Wi-Fi communication by using such an access point,
enable [Using this AP without internet connection] of Advanced
options before connecting to the access point.
Using running apps
You can switch apps with several apps activated at the same
time, or enable/disable Bluetooth function.
1
&
You can operate even when using function or app.
Bluetooth function
: Enable Bluetooth function/
function
Close app
To end app, press z while a running app is selected.
Favorites
Register functions or apps to activate (
Favorites").
Running apps
You can switch apps while several apps are activated.
App list
You can select a function or app from App list to activate.
Using Favorites
Register frequently-used functions and apps to Favorites so
that you can activate them quickly.
1
&▶m
Alternatively, press $▶m to display.
Registered functions or apps can be displayed by pressing
the key while other function or app is used.
Submenu
You can register/cancel functions or apps.
Registered items
Functions or apps can be newly registered to [
29
: Disable Bluetooth
☞
P. 29 "Using
Before Using the Handset
] - [
].
Advertisement
