Download Print this page

Handling Docomo Nano Uim Card; Handling Near Electronic Medical Equipment; Material List - NTT docomo AQUOS Zeta SH-03G Instruction Manual

Advertisement

Always use the specified power supply and voltage.
When using overseas, use the AC adapter that is
available overseas.
Using the incorrect voltage may cause fires, burns or
electric shock.
AC adapter: 100V AC
DC adapter: 12/24V DC (for negative grounded vehicles
only)
AC adapter available overseas: 100 to 240V AC (Connect
only with a household AC outlet)
If the fuse in the DC adapter blows, always replace
it with a specified fuse.
May cause fires, burns or electric shock. Refer to the
respective manuals for information on specified fuses.
Wipe off any dust on the power plug.
May cause fires, burns or electric shock.
Fully plug the AC adapter into the outlet.
May cause fires, burns or electric shock.
Always grasp the adapters when unplugging the
power plug from the outlet or cigarette lighter
socket. Do not forcibly pull by the cord of the
adapter.
May cause fires, burns or electric shock.
When plugging/unplugging an adapter into/from
the handset, plug/unplug the adapter horizontally
and straightly, not applying excessive force on it.
May cause fires, burns, bodily injury or electric shock.
Unplug the power plug from the outlet or cigarette
lighter socket when not using for a long time.
May cause fires, burns or electric shock.
Should water or other liquids enter the equipment,
remove the power plug from the outlet or cigarette
lighter socket immediately.
May cause fires, burns or electric shock.
Always unplug the power plug from the outlet or
cigarette lighter socket before cleaning the
equipment.
May cause fires, burns or electric shock.
Do not touch the adapter for a long time when
connected to an outlet or cigarette lighter socket.
May cause burns etc.

Handling docomo nano UIM card

Be careful with the cutting surface when handling
the docomo nano UIM card.
May cause bodily injury.
Caution
Caution

Handling near electronic medical equipment

If you have electronic medical equipment such as
an implanted cardiac pacemaker or an implanted
cardioverter-defibrillator, always carry or use your
handset at least 15 cm away from your implant.
Electromagnetic signals may have harmful effects on the
operation of the electronic medical equipment.
Patients receiving medical treatment away from a
medical facility (e.g. home treatment) who are using
electronic medical equipment other than implanted
cardiac pacemakers or implanted
cardioverter-defibrillators should consult the
respective manufacturers etc. for information
regarding the effects of signals on the equipment.
Electromagnetic signals may have harmful effects on the
operation of the electronic medical equipment.
If there is any chance that the distance between the
handset and a person closest to you may get
shorter than 15 cm such as when you cannot freely
move around, set the handset not to emit radio
wave in advance (by setting Airplane mode, turning
the power off, etc.).
Somebody nearby may be equipped with electronic medical
equipment such as an implanted cardiac pacemaker or an
implanted cardioverter-defibrillator. Electromagnetic signals
may have harmful effects on the operation of the electronic
medical equipment.
Follow the instructions given by the respective
medical facilities regarding the use of the handset
on their premises.

Material list

Handset
Part
Display side
Surrounding area of display side
Upper surface
Bottom surface
Sides (Metal section)
Sides (Resin section)
Grip sensor
Incoming/Charging illumination
Back
Surrounding area of back
docomo nano UIM card slot
microSD Card slot
7
Warning
Material/Surface treatment
Reinforced glass/Shatterproof
sheet of surface
PA resin/UV coating for
surface
PC resin/UV coating for
surface
Aluminum/Anodizing
Aluminum/Anodizing
PC resin
Aluminum/Anodizing
PC resin
Handset color White: PMMA +
PC resin/UV coating for
surface
Handset color Black, Red:
PET + PC + PET resin/Hard
coating for surface
PA resin/UV coating for
surface
SUS/Ni plating
SUS/Ni plating
Contents/Precautions

Advertisement

loading