Advertisement
Initial settings
When you turn the power on for the first time, the initial
settings screen (Japanese) is displayed. Follow the
instructions on the screen and operate.
To make initial settings in English, press z▶[はい] (Yes) to
skip the initial settings screen, then change the language to
English from 設定 (Settings) menu, and then reboot the handset.
The initial settings screen in English is displayed.
For changing display language,
display to English"
When the handset log acquisition screen or software update
screen is displayed, read the content and select [OK].
Initial settings of security key
For security key, there are two types. Set either passcode or
password.
For passcode, set four- to sixteen-digit number.
For password, set four- to sixteen-digit alphanumeric and
*
halfwidth symbol
including at least one or more alphabets.
* Some half-width symbols are not available.
For security key settings
1
When the initial settings screen is displayed,
Set
Moving to setting of docomo service: C▶C
To finish the initial settings: H/z▶[Yes]
2
Enter the security key 0000
When an information screen is displayed, select [OK].
3
Passcode / Password
Enter a new [Passcode]/[Password] and then enter
[Passcode]/[Password] again.
4
C▶C
☞
P.XX "Changing screen
☞
P.XX "Security key setting"
Initial settings for docomo service
Alternatively, in the standby screen, z▶[Settings]▶[docomo
service].
1
When the Setting of docomo service screen is
displayed, Start setting
2
Make the initial settings
The setting items are as follows.
docomo apps password
docomo location information
Remote initialization
* Not appeared when docomo apps password is not set.
3
［OK］
Wi-Fi settings
If you use Wi-Fi function of the handset, you can use mail or
Internet by connecting to access points of your home,
corporate network or public wireless LAN service.
Radio interference with Bluetooth devices
Wireless LANs (IEEE 802.11b/g/n) use the same frequency
band (2.4 GHz) as Bluetooth devices. Therefore, using the
wireless LAN device near a Bluetooth device may cause radio
interference, lowering of communication speed, noise or
connection failure. In this case, turn off the Bluetooth device
or keep the handset and the wireless LAN device at least
approximately 10 m away from the Bluetooth device.
Packet communication is also available while [Wi-Fi] is set to
On. Wi-Fi connection is prioritized while Wi-Fi connection is set,
but the connection is automatically switched to that of LTE/3G/
GPRS network once Wi-Fi connection is terminated. Note that
packet communication charges may be incurred in this case.
Refer to the manual of your wireless LAN base unit when using
the access point at home etc.
Operate access point registration near the access point.
If you use the docomo service by using Wi-Fi function, set
d ACCOUNT in advance. In the home screen,
[docomo service/cloud]▶[dアカウント設定] (Set d ACCOUNT)
to set it.
1
In the standby screen,
［WLAN］
2
［WLAN settings］ ▶set to ON
3
Select an access point
If you select an access point protected by security, enter the
password (security key) and select [Connect].
To register access points manually:
enter the network name
WPS-compatible access points can be easily registered. In
the standby screen,
[Easy Settings]
▶
register an access point.
28
*
[★]▶[Settings]▶
z▶
［Settings］
z▶
[Add network]
▶
set security
▶
[Save]
z▶
▶
[Settings]
[WLAN]
[WPS Push Button]/[WPS PIN Entry] to
Before Using the Handset
▶
▶
▶z▶
Advertisement
