Advertisement
Profile
Display your own phone number registered to the docomo nano
UIM card. You can register a name, mail address, etc.
By default, only phone number which is registered to the
installed docomo nano UIM card is displayed.
1
In the standby screen,
2
Check/use the profile
Name/Reading
Displayed when a name is registered.
Own phone number
Image
Editing/Using profile
1
In the standby screen,
2
z▶
Edit profile ▶set each item▶C
For items that can be set
phonebook"
To send the profile: z▶[Send via infrared]/[Send data
(share)]▶follow the instructions on the screen and operate
To copy an item: Point the cursor to an item to copy▶m
Checking mail address
1
In the standby screen, m
2
▶
Mail settings
My address
Select [Update] to update My address information.
Using TOUCH CRUISER EX
When operating the camera, browser, etc., touch the handset
touch
area with your finger to operate like using a touch pad. Activating a
function/app corresponding to TOUCH CRUISER EX enables
TOUCH CRUISER EX. You can operate with [ ] (pointer).
When the TOUCH CRUISER EX operation guide screen
appears, read the content and then follow the instructions on the
screen.
Each pressing s for at least 1 second switches TOUCH
CRUISER EX enabled/disabled.
When TOUVH CREUISER EX is disabled, activating a function/
app corresponding TOUCH CRUISER EX (Camera, Browser,
Databox, LINE) does not enable TOUCH CRUISER EX.
Even when TOUCH CRUISER EX is enabled, key operations
are available (except for some apps).
z▶
Profile
z▶
Profile
☞
P. 36 "Adding contacts to
ouch
area
Cautions when using the touch area
The touch area is designed to be lightly touched with your
finger. Do not forcefully press with your finger or a pointed
object (fingernail, ballpoint pen, pin, etc.).
In the following cases, the touch area may not work even if
you touch it. May cause a malfunction.
Operation with a gloved finger
Operation with the tip of a fingernail
Operation with foreign objects placed on the operation pad
Operation on the touch area on which a sticker, etc. is put
Operation while the touch area is wet
Operation with fingers wet with sweat, water, etc.
Tap/Double-tap
Touch the touch area lightly and then release your finger from it to
select an item or icon that [ ] is pointed to. Double-tap is an
operation of tapping the same point twice consecutively.
While a still picture is displayed etc., the screen can be zoomed
in/out by double-tapping. ooming in/out operations can be done
with [ ] on the screen as a start point.
Touch and hold
Keep touching the touch area with your finger to change [ ] to
[
]. Menu appears depending on function or screen in use.
When you touch the touch area, or perform no operation for a
few seconds after your finger is released, [
Slide
Touch and hold the touch area to change [ ] to [
trace with your finger to a target direction or point to scroll the
screen, or switch pages.
19
] returns to [ ].
], and then
Before Using the Handset
Advertisement
