Advertisement
Using Bluetooth function
To register/connect a Bluetooth device, the Bluetooth passkey
may need to be entered. Before starting the registration, decide
one- to sixteen-digit number.
Enter the same number on the handset and the other party s
Bluetooth device.
1
In the standby screen, z▶Settings
Bluetooth
2
Bluetooth
3
Select a Bluetooth
The confirmation screen for connection may be displayed.
Entering the Bluetooth passkey may be necessary
depending on the other party s Bluetooth device. Also, some
Bluetooth devices may start connection after completing
registration.
To display/hide the handset s information on other Bluetooth
devices: [SH-01J]
The handset s information is automatically hidden when
the period of time set for Visibility timeout has passed.
To search for Bluetooth devices: z▶[Refresh]
Press C of a paired Bluetooth device to change the name
and the connection type of the other party s Bluetooth
device.
You can connect up to 7 Bluetooth devices at the same time.
Bluetooth devices may not work properly or the number of
Bluetooth devices which can be connected at the same time
may differ depending on the profile.
If you fail to connect a Bluetooth device, connection may
become available after re-registering it.
When the Bluetooth function is set to [ON], the handset is set
to receive registration requests/connection requests from other
Bluetooth devices. Make the setting for displaying the handset s
information on other Bluetooth devices in advance to allow the
handset to be searched for by other Bluetooth devices.
While in connection stand-by, even if a connection request from
a Bluetooth device is received, connection may not be made
depending on the signal status etc.
For details on the operations of the other party s Bluetooth
device, refer to the manuals of the Bluetooth device to be used.
When receiving registration request from Bluetooth
device or connection request from unregistered
Bluetooth device
1
Registration request/Connection request from
Bluetooth device
2
In the standby screen, p▶select the stock
▶
icon
Pairing request
When the confirmation screen about the settings on pairing
appears, select [Pair].
Entering the Bluetooth passkey may be necessary
depending on the other party s Bluetooth device.
The confirmation screen for connection may be displayed.
Unregistering Bluetooth device
1
In the Bluetooth screen, point the cursor to the
Bluetooth device to
▶
device▶
Pair
▶
Pair
unregister▶C▶
Unpair
Disconnecting Bluetooth device
1
In the Bluetooth screen, select the Bluetooth
device to
disconnect▶
Submenu operations on the Bluetooth screen
Set Bluetooth to [ON] beforehand.
1
In the Bluetooth screen, z
2
Select an item
Search for devices
Rename phone:
Visibility timeout
be displayed on other Bluetooth devices.
Handsfree
setting: Set whether to always have voices output
from the connected Bluetooth compatible hands-free device
during a voice call.
Show received
files: Display the history of data received via
Bluetooth connection.
Sending/Receiving via Bluetooth
communication
Sending data
Example Still picture
1
In the standby screen,
2
Select a still picture
3
z▶
Send
▶
Set the receiver s Bluetooth device to the reception stand-by
status.
4
Select a Bluetooth device to connect to
Receiving data
1
Data is sent from the sender's Bluetooth device
2
In standby screen, p▶select the status
select the incoming
3
In standby screen, p▶select the status
select the receiving notification▶select the
received data
Note that if you select [Delete and register] when receiving all
data, all data registered to the target function are deleted.
Receiving all data may not be available depending on the data
type.
When available space in the save destination becomes
insufficient while receiving data, the data being received to that
point are saved and receiving ends.
75
OK
:Search Bluetooth devices nearby.
:Change the handset s name.
:Set how long the handset s information will
z▶
Album
Bluetooth
notification▶
Accept
Data communication
bar▶
bar▶
Advertisement
