Modes Of Operation; Product Configurations - Dejero LIVE+ EnGo User Manual

Broadcast from virtually anywhere
Cellular, Wi-Fi®, and portable satellite connections from a compact transmitter enable you to
broadcast live reliably from virtually anywhere. You can even broadcast live while moving.
Remarkable performance
Bonding up to eight network connections, EnGo reliably delivers exceptional picture quality with
low latency, even in challenging bandwidth conditions. Get your live shot where others can't.
Cloud control
With LIVE+ Control and any web browser, you can geolocate, monitor performance, remotely
control preview feeds, and route your content – giving you ultimate control.

Modes of operation

Live: Transmit live video over bonded cellular, Wi-Fi, Ethernet, or satellite connections to the
LIVE+ servers.
Store & Forward: Record video for later transmission. Use this mode when a live feed is not
required, or when bandwidth is limited or not available.
Live and Store & Forward: Transmit live while also recording high-quality video to use later.
Use this mode when network bandwidth is limited but you need to broadcast live.
File Transfer: Quickly transfer photos, scripts, graphics, or edited video packages to the LIVE+
servers using bonded connections.

Product configurations

Your EnGo used one of following connection configurations:

Wi-Fi/ETH

Wi-Fi/ETH/2-Modem

Wi-Fi/ETH/4-Modem

Wi-Fi/ETH/6-Modem
Each option with cellular modems contains an integrated Radio Frequency (RF) module and is
available in North American and international versions. Some functionality only applies to EnGo
transmitters with RF modules.
8 | LIVE+ EnGo User Guide
www.dejero.com