About Connection Ports; Powering The Engo - Dejero LIVE+ EnGo User Manual

2. Make sure that all cables are firmly connected.
The EnGo selects the correct video input automatically. If you do not see video on the Preview
screen, make sure that the cables are connected properly and that you are using a supported
video format.
If the video format is not detected automatically, you may need to configure the video settings.
For more information, see Configuring the transmitter on page 13.

About connection ports

The connection ports are located on the I/O side of the EnGo.

Powering the EnGo

You can use the following methods to power your EnGo:

Gold Mount or V-Mount hot-swappable battery

Supplied power adapter (19V DC output with locking connector)
Install the battery

On the battery side of the transmitter, slide the battery onto the battery mounting plate.
When properly inserted, the battery clicks into place and is seated securely on the plate. You
can replace the battery without interrupting the EnGo operation.
Recommended battery requirements

Nominal voltage of 14.4V (operating voltage of 12.0V to 16.8V)

95 WH battery, capable of 8.4A maximum at 12V, is recommended for powering EnGo,
camera, and accessories.
10 | LIVE+ EnGo User Guide
www.dejero.com