Specifying The Camera Input Type; About The Engo Usb Ports; Configuring The Transmitter - Dejero LIVE+ EnGo User Manual

From the Live Menu, you can quickly select the parameters for your live feed. Tap the Live
Menu button to access the three live feed latency profiles: Feed, Auto, or User.

Use the Feed profile to send video to the station in poor network conditions. You can
also use Feed when you have time to send the highest quality video or when recording
live events without anchor desk and reporter interaction.

Use the Auto profile to adapt to network conditions. It increases latency as needed.

Use the User profile if you set the configuration options manually. For more information,
see Configuring the transmitter on page 13.
The Record Menu lets you quickly set the quality of the Store & Forward clip quickly. You can
choose from: High, Medium, or Low.
Note: Your LIVE+ Control administrator must assign the transmitter before it can be
used. If your administrator has not assigned the transmitter, an error appears. Your
administrator can also change the server output destination using the LIVE+
Control.
For a list of possible error messages, see page 26.

Specifying the camera input type

After the camera is connected and a video preview appears on the EnGo, use the Configuration
screen to verify your settings, if necessary. On this screen, you can check your video and video
format type, connection type, and latency settings.
1. On the Preview screen, tap the menu.
2. Tap Settings.
3. Tap Input.
4. Tap Video Input.
For more information about the configuration settings, see page 13.

About the EnGo USB ports

The EnGo has two USB ports. You can use these ports to connect USB memory sticks (for file
transfers,) support peripherals (such as a keyboard or mouse,) or other supported devices.

Configuring the transmitter

Use the Settings screen to configure the transmitter settings.
Set the video input
By default, the transmitter automatically detects HDMI or SDI connections, frame rate, and
resolution. If the settings are not detected automatically, you can set them manually.
1. On the Preview screen, tap the menu.
2. Tap Settings.
3. Tap Input.
13 | LIVE+ EnGo User Guide
www.dejero.com