Using The Remote Control; Configuring Auto Start; Changing The Display Orientation - Dejero LIVE+ EnGo User Manual

Transfer
If an error occurs during a Store &Forward clip transfer or file transfer, a red X appears on the
row.

Using the remote control

You can control the EnGo from a remote location using the Remote Control feature in the LIVE+
Control. For more information, see the LIVE+ Control User Guide.
When the Remote Control is active, a blue border appears on the Preview screen. The blue
border only appears at the top of the menu screen. The Info screen shows the name of the user
who is controlling the EnGo.
View the Remote Control user
1. On the Preview screen, tap menu.
2. Tap Settings.
3. Tap Info.
When the Remote Control is active, the Preview screen and the transmission activity continue to
appear and the buttons work.

Configuring Auto Start

When you set the Auto Start mode, the EnGo initiates a live transmission when you turn it on
and EnGo detects video input. The transmission starts automatically or after a specified delay.
1. On the Preview screen, tap the menu.
2. Tap Settings.
3. Tap Operation.
4. Tap Auto Start.
5. Tap your delay selection: No delay, 1 minute, 2 minutes, 3 minutes, 4 minutes, or 5
minutes.
Note: If you turn on Auto Start, the live stream starts when the transmitter detects
video. If the live stream is stopped manually, Auto Start does not start again until
you turn off and turn on the EnGo again.

Changing the display orientation

When using the carry case, for proper venting, the EnGo must be closest to the body, with the
battery facing away from the body. The vents on each end of the bag must be unobstructed.
You can change the EnGo display when wearing the transmitter in the carry case to make sure
that you can still read the screen.
1. On the Preview Screen, tap the menu.
2. Tap Settings.
3. Tap Operation.
22 | LIVE+ EnGo User Guide
www.dejero.com