Configuring The Connection Type - Dejero LIVE+ EnGo User Manual

remains on the screen. When the bandwidth increases and remains at 200 Kb/s or better, the
transmitter resumes sending video.
Note: If you set a maximum connection bitrate less than 400 Kb/s manually, the
transmitter does not switch to audio-only mode.

Configuring the connection type

You can set the type of connection to use when transmitting data.
1. On the Preview screen, tap the menu.
2. Tap Settings.
3. Tap Connections.
4. Tap Connection Types.
5. Set the Connection mode to All, Ethernet, or Modems.
6. Tap Back.
Connection modes
All: The transmitter sends data through all available connections, including cellular, Ethernet
and Wi-Fi. The transmitter uses only the connections that are available. If multiple connections
are available, the transmitter uses all connection types simultaneously.
Ethernet: The transmitter sends data over Ethernet or Wi-Fi or both. If you select this option but
do not have an Ethernet cable connected or a Wi-Fi connection configured, an error appears on
the screen.
Modems: The transmitter sends data over the modem connections only. Use this mode when
your Wi-Fi or Ethernet connection is poor, with high usage and low bandwidth. If your EnGo has
an RF module, this option applies. If you have purchased an Ethernet/Wi-Fi only EnGo, or no
modems are installed, this option is not available.
Set the Ethernet connection type
1. On the Preview screen, tap the menu.
2. Tap Settings.
3. Tap Connections.
4. Tap Ethernet Types.
5. Tap Normal or Satellite.
6. Tap Back.
Ethernet connection types
Normal: This connection type uses a regular Ethernet line, such as a cable DSL connection, a
hotel Internet link, or a corporate office Ethernet port.
Satellite: This connection type is for high-reliability, high-latency links. It is typical of a portable
satellite connection. In Satellite mode, the transmitter accounts for the long latency of the
connection, and uses any other available connections (cellular or Wi-Fi) to supplement the
16 | LIVE+ EnGo User Guide
www.dejero.com