Configuration / Project Engineering; Replacing A Device - Siemens SCALANCE X-400 Operating Instructions Manual

Configuration / project engineering

6.1

Replacing a device

Replacing a device
Note
If you replace an IE Switch X-400, remember the following:
• Make the same settings on the DIL switches of the new SCALANCE X414-3E device as
they were on the old device.
• Install the identical media module configuration and, if applicable with the SCALANCE
X414-3E, the extender module configuration on the new device as was on the old device.
• Use the C-PLUG of the old device in the new one. This means that the previous device
configuration will be adopted automatically when the new device starts up.
SCALANCE X-400
Operating Instructions, 06/2015, C79000-G8976-C186-12
6
113