Led Display - Cpu Module - Siemens SCALANCE X-400 Operating Instructions Manual
Simatic net industrial ethernet switches
Hide thumbs
Also See for SCALANCE X-400:
- Operating instructions manual (148 pages) ,
- Compact operating instructions (42 pages) ,
- Configuration manual (404 pages)
Table of Contents
Advertisement
Configuration / project engineering
6.5 LED display
6.5.4
LED display - CPU module
CPU module
On the SCALANCE X414-3E, the LEDs of the CPU module are on slot 4;
on the SCALANCE X408-2, they are on slot 3.
Display modes A through D
The set display modes are indicated as follows:
Figure 6-8
The individual functions (RM, SB and D1/D2) are independent of each other. The LED
displays are described below:
Label
RM
SB
D1
D2
126
Display of the possible display modes (DMode A through DMode D)
Color
Status
Meaning
off
The IE Switch X-400 is not operating in redundancy manager
mode.
Green
on
The IE Switch X-400 is operating in redundancy manager mode.
The ring is working without problems, monitoring is activated.
flashes
The IE Switch X-400 is operating in redundancy manager mode.
An interruption has been detected on the ring; the IE Switch -
400 has switched through.
off
The standby function is disabled.
Green
on
The standby function is enabled and the standby ports are disa-
bled.
flashes
The standby function is enabled and the standby ports are ena-
bled; in other words, the send and receive frames.
Green
on
Green
on
Operating Instructions, 06/2015, C79000-G8976-C186-12
SCALANCE X-400
Advertisement
Table of Contents
