Installing The Weather Cover - Optional Accessory - Electro-Voice EVID-P6.2B Installation Manual

EVID Pendant Speaker
6.
7.
8.
9.
3.2 Installing the weather cover – optional accessory
To wire the speaker using Euroblock connector and weather cover, do the following:
1.
2.
Electro-Voice
Insert the threaded rod adapter locking screw through the adapter holes and speaker
mounting plate center hole.
Tighten nylon locking nut to the other end of the suspension screw.
Attach a secondary auxiliary support cable (not included) onto one of the suspension
tab side holes in the top of the speaker.
Secure the secondary auxiliary support cable (not included) to a different ceiling
support point of the building structure.
Mount the speaker, as shown in the installation section.
Loosen the gland nut.
Installation manual
Installation | en 11
2018.09 | 03 | F.01U.358.439